PROJECT SUPPORT

General Design of Concrete Masonry Structures

1.0 CEU

This course explores the required concrete masonry design considerations to ensure a fully designed wall system that adheres to structural, fire, acoustic and energy design. The structural consideration will include the basis of design parameters, applications, design considerations, elemental design and limit states. While structural design is important, the course will discuss our ensuring fire, acoustical and energy compliance must also fit into the requirements of the wall system.

Objectives

  1. Review basic concrete masonry walls and the required elements that encompass the system.
  2. Review structural design applications, considerations, elemental design, and limit states.
  3. Review fire design code requirements and compliance strategies for CMU walls.
  4. Review acoustic and energy properties of CMU and compliance strategies.

TAKE COURSE
RELATED RESOURCES
Normalizing Delegated Design of Concrete Masonry
Delegated design and a project delivery method that many material industries utilize effectively to deliver a cost effective building. This presentation highlights the need to normalize delegated design for concrete masonry elements. This includes, lintels, elevator shaft walls, non-load bearing walls, and load bearing structures. This presentation will explore how the process can be delivered in today's projects and resources available to make the effort minimal.
VIEW RESOURCE
Architectural Concrete Masonry: Single-Wythe Walls
This course introduces the design and performance fundamentals of architectural single-wythe concrete masonry. Participants will explore how concrete masonry’s inherent durability, resilience, thermal mass, and low-embodied-carbon contribute to high-performing building envelopes. The program explains key strategies for moisture management—including surface protection, integral water repellents, flashing, weeps, and crack-control detailing to keep single-wythe CMU walls dry and long-lasting. Learners will examine energy-code compliance pathways for mass walls, insulation options, and how density, thermal mass, and assembly configuration influence energy performance. The course concludes with practical guidance on air and vapor barriers, utilities, sample panels, and cleaning procedures to ensure high-quality outcomes in architectural CMU projects.
, , , , ,
VIEW RESOURCE
Architectural Concrete Masonry: Veneers & Cavity Walls
Architectural concrete masonry anchored veneers combine beauty, durability, and low maintenance while offering architects significant design flexibility. This course examines the finishes, sizes, profiles, and colors that distinguish architectural CMU, and explores the high performance these systems achieve when coupled with concrete masonry cavity walls. Participants will review essential detailing recommendations for veneers, including how to accommodate openings, flashing, anchoring, and crack control strategies. The session also covers energy performance benefits, thermal mass advantages, and cavity wall insulation strategies, while emphasizing quality assurance through sample panels. The course finishes with discussing cleaning recommendations for architectural masonry.
, , , ,
VIEW RESOURCE
Climate-Responsive Design: Balancing Resilience, Thermal Performance and Embodied Carbon with Concrete Masonry
This course explores how using concrete masonry units (CMU) in the built environment provides an integrated approach to climate-responsive design by simultaneously addressing three critical sustainability strategies: resilience, operational energy use, and embodied carbon reduction. Participants will examine how CMU construction offers inherent solutions to modern building challenges, from natural disasters and extreme weather events to energy conservation and carbon footprint reduction. The course demonstrates that CMU structures perform beyond code requirements without additional measures, providing durable, cost-effective buildings that support community resilience while contributing to low embodied carbon goals.
, , , ,
VIEW RESOURCE
Maximizing Concrete Masonry Performance Through Structural Design
This course will cover various design components of efficient structural masonry design. It is intended to help the audience understand the implications of structural design solutions and their impact on masonry performance. The goal is to offer actionable recommendations and standards that promote efficient, cost-effective masonry solutions.
, ,
VIEW RESOURCE
Concrete Masonry: Navigating Energy Codes to Maximize Thermal Mass Performance
This course examines how concrete masonry’s thermal mass contributes to energy efficiency across a range of climate zones and building types. It describes the role of heat capacity and mass wall behavior in overall thermal performance and outlines how these attributes are addressed within current energy codes. The session reviews prescriptive, trade-off, and whole-building performance pathways in ASHRAE 90.1 and the IECC, highlighting how CMU assemblies are evaluated in each method. The course also presents commonly used compliance tools, and shows how they support energy-code documentation for mass-wall designs.
, , ,
VIEW RESOURCE
What Non-Engineers Need to Know About Concrete Masonry
This course provides a foundational understanding of structural concrete masonry for professionals outside the field of structural engineering. It explores key aspects of concrete masonry systems, including block types, mortar and grout properties, reinforcement strategies, and design practices. Participants will gain insights into how structural masonry is applied in modern construction, its advantages over alternative systems, and the common design errors to avoid. Learners will understand the cost, time, and sustainability benefits of choosing efficient masonry solutions in building design.
,
VIEW RESOURCE
Concrete Masonry: From Manufacturing to Structural Applications
This module explores the fundamentals of concrete masonry construction, beginning with the manufacturing process of concrete masonry units (CMUs) and examining both standard gray block and architectural finishes. Participants will learn about various CMU shapes, sizes, and modular design principles that optimize construction efficiency. The course covers essential structural considerations, including the differences between unit compressive strength and specified masonry assembly strength (f'm), and examines how tall structures can be built using concrete masonry. Additionally, the module introduces efficient design strategies that help reduce both project costs and embodied carbon, making concrete masonry an economical and sustainable building solution.
, , , , ,
VIEW RESOURCE
Smart Applications for Concrete Masonry Systems
"Smart Applications for Concrete Masonry Systems" explores how concrete masonry units (CMU) function structurally and reviews their diverse applications in construction. CMU's intrinsic values including durability, energy efficiency through thermal mass, fire resistance, ballistic protection, sound attenuation, and storm resilience are covered. It examines various applications from cavity walls and single-wythe structures to fire walls, stairwells, corridors, and public spaces, emphasizing how concrete masonry provides both functional benefits and aesthetic possibilities while offering superior performance.
, ,
VIEW RESOURCE

We value your privacy

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking “Accept”, you consent to the use of ALL the cookies. However you may visit Cookie Settings to provide a controlled consent.

Reject All
Accept All
Design Assistance